AudioControl D-4.800 Matrix DSP 2/3/4-Channel Car Audio Amplifier with AccuBASS, 800W, Class D Premium High-Fidelity Multichannel Amp, 30-Band Equalizer, Works with OEM & Aftermarket Sound Systems

Brand: AudioControl

Color: BLACK

Features:

• 𝗠𝘂𝗹𝘁𝗶-𝗖𝗵𝗮𝗻𝗻𝗲𝗹 𝗙𝗹𝗲𝘅𝗶𝗯𝗶𝗹𝗶𝘁𝘆: Configurable as a 4-channel, 3-channel, or 2-channel amplifier for use with a variety of car sound systems.
• 𝗣𝗲𝗿𝗳𝗲𝗰𝘁 𝗳𝗼𝗿 𝗢𝗘𝗠 𝗜𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝗔𝗳𝘁𝗲𝗿𝗺𝗮𝗿𝗸𝗲𝘁 𝗕𝘂𝗶𝗹𝗱𝘀: Features 4 balanced RCA line-level preamp inputs for use with aftermarket radios and 6 speaker-level inputs capable of handling input levels up to 40V, for use with factory head units and premium amplified factory sound systems.
• 𝗖𝗹𝗮𝘀𝘀 𝗗 𝗛𝗶𝗴𝗵 𝗖𝘂𝗿𝗿𝗲𝗻𝘁 𝗗𝗲𝘀𝗶𝗴𝗻: Provides unprecedented output up to 800W continuous RMS power (4 x 125W @ 4Ω, 4 x 200W @ 2Ω, 2 x 400 W @ 4Ω Bridged).
• 𝗔𝗰𝗰𝘂𝗕𝗔𝗦𝗦 𝗥𝗲𝘀𝘁𝗼𝗿𝗮𝘁𝗶𝗼𝗻: Corrects bass roll-off caused by processing built-in to your factory head unit.
• 𝗕𝘂𝗶𝗹𝘁-𝗜𝗻 𝗗𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰 𝗖𝗼𝗱𝗲𝘀: Provide exact insight should the amplifier detect a problem.
• 𝗚𝗧𝗢 𝗦𝗶𝗴𝗻𝗮𝗹 𝗦𝗲𝗻𝘀𝗶𝗻𝗴: Gracefully turns on your amplifier when an incoming audio signal is detected on inputs 1 and 2, then turns off after a period of time when the audio signal fades away to silence.
• 𝗠𝗜𝗟𝗖 𝗖𝗹𝗶𝗽 𝗗𝗲𝘁𝗲𝗰𝘁𝗶𝗼𝗻 𝘄𝗶𝘁𝗵 𝗟𝗘𝗗 𝗜𝗻𝗱𝗶𝗰𝗮𝘁𝗼𝗿: Prevents clipping and potentially damaging distortion.
• 𝟯-𝗪𝗮𝘆 𝗟𝗶𝗻𝗸𝘄𝗶𝘁𝘇-𝗥𝗶𝗹𝗲𝘆 𝗖𝗿𝗼𝘀𝘀𝗼𝘃𝗲𝗿𝘀: High-pass, low-pass, and band-pass crossovers at 12 dB/octave (adjustable from 30 Hz – 5000 Hz) ensure only the correct frequencies reach your car audio speakers.
• 𝗢𝗽𝘁𝗶𝗼𝗻𝗮𝗹 𝗥𝗲𝗺𝗼𝘁𝗲 𝗟𝗲𝘃𝗲𝗹 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 𝗜𝗻𝗽𝘂𝘁: Connect the AudioControl ACR-3 dash remote (sold separately) for full control from the driver’s seat over the volume level of specific output channels (configurable during installation).

model number: D-4.800

Part Number: D-4.800

Details: Amplifier and DSP in one package Two keys to unlocking great sound in a car stereo system are serious power and extensive control - and this amp's got them both. For power, AudioControl's D-4.800 4-channel amplifier generates 125 watts RMS per channel, so it'll drive even the most demanding aftermarket speakers with plenty of headroom to spare. You could also bridge the D-4.800 to drive a couple subwoofers with 400 watts RMS each. Computer-controlled digital signal processing Smart-User DSP tuning software on a laptop (DM-810 version shown) You won't find any knobs on the D-4.800 - you make adjustments and save settings via your laptop (PC or Mac). AudioControl's Smart-User DSP software package includes 12 or 24 dB/octave Linkwitz-Riley crossovers, 30-band equalizers, parametric filters, time delay/alignment for inputs and outputs, phase correction, AccuBass(tm) bass correction, and real-time analyzers (RTA) for the inputs and outputs so you can visually confirm the improvements in the sound. It's made to work with a factory radio Six active speaker-level inputs allow you to connect this amp to almost any factory system, even ones that have separate pre-filtered, time-aligned, and amplified signals going to separate factory speakers and tweeters. The D-4.800 sums them into one smooth, unified signal for you to balance, align, and tune for your better-sounding aftermarket speakers. AudioControl's Great Turn On (GTO(tm)) signal-sensing circuitry turns the amp on automatically whenever it senses an input, so you won't have to run a separate turn-on lead back to the receiver. Convenient features Onboard LEDs indicate optimized signal flow for inputs and outputs, plus give you a warning when a source is too loud and causing distortion. An optional ACR-3 wired remote controller lets you select sources, control levels, and recall presets from your front seat.

EAN: 0855814005792

Package Dimensions: 14.6 x 11.7 x 3.7 inches