[FITMENT]: The CARORAV tire pressure sensor fit for 2009-2017 433Mhz Chrysler 300,2011-2016 Chrysler Town&Country,2012-2016 Dodge C/V,2010-2022 Dodge Challenger,2010-2022 Dodge Charger,2011-2015 Dodge Durango,2011-2020 Dodge Grand Caravan,2011-2020 Dodge Journey ect
[PRE-PROGRAMMED]: PRE-PROGRAMMED DO NOT mean the sensor will automatically match your vehicle, it need to require a re-learning/reset operation. And some re-learning/reset procedures may require a professional diagnostic scanner or activation tool
[VERIFY VEHICLE FITMENT]: 1.Check “amazon confirmed fit” at the top of the page to determine the compatibility of your vehicle, 2. Check the matching information related to “APPLICABLE MODELS” on the page, 3. Please feel free to contact us if you have any questions
[ATTENTION]: STOP INSTALLATION if it has no response. Before installation, pls use tpms tool to scan the tpms sensor. If it can't be read or triggered correctly, DO NOT proceed with the sensor replacement installation
[HOW TO RELEARN]: OBDII RELEARN: 1.OBDII connector is required, 2.Confirm TPMS sensors are properly installed, 3.Adjust tire pressures to placard value, 4.Activate TPMS tool on left front tire sidewall next to the valve stem, 5.Repeat for Rf/RR/LR tires, 6.Apply OBD connector to DLC, 7.Tern ignition to ON, 8.Press OK on TPMS Tool to transfer date to ECU, 9.Disconnect OBD connector from DLC, 10.Turn ignition to OFF then start the engine, 11.Drive for at least 5 minutes at 28 mph
